Remove/install extinguishing agent reservoir covering

Type ar · emne 86.10 · version 0103 · 2019-02-25

Gælder for: Model 463.236/248 up to model year 2019 with code 979 (Special protection MB Guard) with code ZS6 (Special protection version FB6) with fire extinguishing system Model 463.236/248 up to model year 2019 with code 979 (Special protection MB Guard) with code ZS7 (Special protection version FB7) with fire extinguishing system Model 463.242 up to model year 2019

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 86 Nødudstyr, handicapvenligt udstyr, sanitært udstyr, køkken › 86.10 Nødudstyr — Serie 463 (modeller 236, 242, 248)

EinPAS 27 Passive sikkerhedssystemer › 27.21 Brandslukningssystem/brandmeldesystem › 27.21.50 Beholder — Serie 463 (modeller 236, 242, 248)

AR86.10-P-0103A

Remove/install extinguishing agent reservoir covering

17.01.2019

Model	463.236/248
	up to model year 2019
	with code 979 (Special protection MB Guard)
	with code ZS6 (Special protection version FB6)
	with fire extinguishing system
Model	463.236/248
	up to model year 2019
	with code 979 (Special protection MB Guard)
	with code ZS7 (Special protection version FB7)
	with fire extinguishing system
Model	463.242
	up to model year 2019

Remove/install extinguishing agent reservoir covering

Left extinguishing agent tank trim is shown

1	Extinguishing agent tank trim

P86.10-2102-11

 	Remove/install
1	Remove upper section of extinguishing agent tank trim (1)
2	Remove extinguishing agent tank trim (1) from vehicle
3	Disconnect side pieces of extinguishing agent tank trim (1) from each other
4	Install in the reverse order	 Check expansion anchors and plastic screws, replace if necessary.