ar8370d5757c

Remove and install heating element

Type ar · emne 83.70 · version 0101 · 2003-09-29

Gælder for: MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater AIRTRONIC heaterD2 MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater Heater AIRTRONIC D4 MODELS WD1##, WD2##, WD3##, WD6##, WD7## ### as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater Heater AIRTRONIC D4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.70 Parkeringsvarmesystem, ekstra varmesystem, ekstra varmeapparat — Serie 901 (modeller 62*, 66*, 67*) · Serie 902 (modeller 62*, 66*, 67*) · Serie 903 (modeller 62*, 66*, 67*) · Serie 904 (modeller 62*, 66*) · Serie 905 (modeller 62*)

EinPAS 39 Varmesystem/ventilation/køling › 39.25 Parkeringsvarme/ekstra varmesystem › 39.25.30 varmeapparat — Serie 901 (modeller 62*, 66*, 67*) · Serie 902 (modeller 62*, 66*, 67*) · Serie 903 (modeller 62*, 66*, 67*) · Serie 904 (modeller 62*, 66*) · Serie 905 (modeller 62*)

AR83.70-D-5757C

Remove and install heating element

25.11.02

MODELS 901.62#, 902.62#, 903.62#, 904.62#, 905.62# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater
AIRTRONIC heaterD2

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater
Heater AIRTRONIC D4

MODELS WD1##, WD2##, WD3##, WD6##, WD7## ### as of 382002 as of 12.3.02 with CODE (H11) Warm air auxiliary heater
Heater AIRTRONIC D4

Remove and install heating element

D83.70-1289-09

1 Cover

2 Casing housing

3 Locking lug

7 Glow pin screen

8 Auxiliary heating control unit

9 Bleeder hole

4 Glow pin connection line plug

5 Glow pin grommet

6 Glow plug

Remove/Install

1

Remove heater

Models 901.6, 902.6, 903.6, 904.6, 905.6 with AIRTRONIC heaterD2

AR83.70-D-5302H

Models 901.6, 902.6, 903.6, 904.6,

WD1, WD2, WD3, WD6, WD7 with AIRTRONIC heater D4

AR83.70-D-5302K

2.1

Remove heater from the housing

Models 901.6, 902.6, 903.6, 904.6,

WD1, WD2, WD3, WD6, WD7 with AIRTRONIC heaterD4

AR83.70-D-5399A

3

Unlock locking lugs (3) of cover (1)

4

Lift up cover (1) and remove from casing housing (2) of the heater

5

Remove auxiliary heater control unit (8)

Only remove control unit, do not disconnect cables

AR83.70-D-5937F

6

Disconnect plug (4) of connection line for glow pin from auxiliary heater control unit (8)

7

Remove grommet (5) and unscrew glow pin (6)

8

Pull glow pin screen (7) out of glow pin pocket

Installation: Position the glow pin screen (7) so that the recess clearance (arrow) is at a right angle to the longitudinal axis of the heater. Carefully insert the screen in the passage as far as it will go. After the screen is fully inserted, the ventilation bore (9) for the glow pin must be aligned exactly with the recess clearance.

9

Install in the reverse order

Henviste dokumenter