ar8370d539805a

Detaching and attaching trim parts

Type ar · emne 83.70 · version 0100 · 1997-02-07

Gælder for: MODEL 902.32 /42, 903.32 /42, 904.32 /42 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C MODEL 903.02 with CODE (H11) Hot air auxiliary heater Heater designation B1L-C

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.70 Parkeringsvarmesystem, ekstra varmesystem, ekstra varmeapparat — Serie 902 (modeller 32*, 42*) · Serie 903 (modeller 02*, 32*, 42*) · Serie 904 (modeller 32*, 42*)

EinPAS 39 Varmesystem/ventilation/køling › 39.25 Parkeringsvarme/ekstra varmesystem › 39.25.5 parkeringsvarme/ekstra varmesystem komplet — Serie 902 (modeller 32*, 42*) · Serie 903 (modeller 02*, 32*, 42*) · Serie 904 (modeller 32*, 42*)

AR83.70-D-5398-05A

Detaching and attaching trim parts

Detaching and attaching trim parts

D83.70-0015-01

Removal

1 Remove exit hood (12) from jacket shell (4, 14).

Drive spreading rivet pin (arrow A) through with suitable tool and pry rivet (5) out with knife blade.

2 Remove upper jacket shell (4) from lower jacket shell (14).

Drive spreading rivet pin (arrow A) through with suitable tool and pry rivet (5) out with knife blade.

3 Remove lower jacket shell (14).

Detaching and attaching trim parts

D83.70-0014-02

Attachment

4 Attach lower jacket shell (14).

The recesses (arrow B) on the lower jacket shell must fit in the locating hooks
(arrow C), otherwise the fan impeller can hit.

5 Position upper jacket shell (4) on lower jacket shell (14) and fasten with new spreading rivets.

6 Position exit scoop (12) on jacket shell (4, 14) and fasten with new spreading rivets.