ar8355g5360cm

Remove/install refrigerant compressor mounting support

Type ar · emne 83.55 · version 0100 · 2018-10-03

Gælder for: Model 437.465 as of 4/1/17 with engine 924.916 with code M25 (Air conditioning compressor reinforced) Model 437.465 up to 3/31/17 with engine 924.916 with code M46 (Additional alternator + reinforced a/c compressor)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.55 Kølemiddelkompressor — Serie 437 (modeller 465)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.40 Kølekompressor — Serie 437 (modeller 465)

Gælder også for motorer/gearkasser: 924 916

AR83.55-G-5360CM

Remove/install refrigerant compressor mounting support

20.09.2018

Model	437.465 as of 4/1/17 with engine 924.916
	with code M25 (Air conditioning compressor reinforced)
Model	437.465 up to 3/31/17 with engine 924.916
	with code M46 (Additional alternator + reinforced a/c compressor)

Remove/install refrigerant compressor mounting support

1	Fastening bracket
2	Guide pulley
3	Bolts

G83.55-3130-01

 	Remove/install
1	Open hood.	 See information from body manufacturer.
2	Remove refrigerant compressor.		AR83.55-G-5310F
3	Remove guide pulley (2) from mounting support (1).	Only when replacing the mounting support (1).
		 Screw, guide pulley to mounting support	*BA13.22-N-1001-01D
4	Remove screws (3) and remove mounting support (1).	 Screw, mounting support to crankcase/cylinder head	*BA83.55-N-1004-01F
5	Check mounting support (1) for cracks and damage.	If complaint is present,
		
		Replace mounting support (1).
6	Install in the reverse order

 Single-belt pulley

Number	Designation			Engine 900.91/92, 902.92/93, 904.92/95, 906.935/95, 924.91/92/93
BA13.22-N-1001-01D	Screw, guide pulley to mounting support	M8	Nm	25
		M10	Nm	50
		M12	Nm	85

 Refrigerant compressor

Number	Designation			Model 437.465
BA83.55-N-1004-01F	Screw, mounting support to crankcase/cylinder head	M10	Nm	50

Henviste dokumenter

ar8355g5310f