ar8350t5010ca

Remove/install evaporator unit paneling

Type ar · emne 83.50 · version 0100 · 2005-07-12

Gælder for: MODELS NMB613.367 with CODE (HKG) Konvekta ACX 623 air conditioning with roof heater

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.50 Bagsædeklimaanlæg — Serie 613 (modeller 367)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.30 Beklædning kabine — Serie 613 (modeller 367)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.32 hus/varmeveksler/fordamper/filter — Serie 613 (modeller 367)

AR83.50-T-5010CA

Remove/install evaporator unit paneling

14.1.05

MODELS NMB613.367 with CODE (HKG) Konvekta ACX 623 air conditioning with roof heater

Remove/install evaporator unit paneling

T83.50-0066-11

1 Trim panel

2 Bayonet lock

Remove/install

Danger!

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Remove air conditioning cover

AR83.50-T-5000-01C

2

Loosen all the bayonet locks (2)

Open bayonet locks (2) by turning each of them through 90°.

Installation:

Turn the bayonet locks (2) to the locking position.

Move the bayonet locks (2) by pressing down until they are felt and heard to latch into place.

3

Detach paneling (1) from evaporator unit

Use aid of helper.

4

Install in the reverse order

Henviste dokumenter