Remove and install multifunction sensor

AR83.40-P-6730P

Remove and install multifunction sensor

16.2.12

 

Removing, installing

Danger!

Injury Hazard! Windshield wiper mechanism can pinch, crush or, in extreme cases, even sever extremities

Always remove ignition key when working on windshield wiper mechanism

AS82.30-Z-0001-01A

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A



Notes on battery

All models

AH54.10-P-0001-01A

1

Open engine hood

2

Open snap locks (1)

3

Loosen bolt (7a)

4

Turn bracket (7) slightly

Installation: ensure that the bracket (7) is correctly seated at the dust filter housing (2).

5

Remove dust filter housing (2)

6

Unscrew bolt (4)

 Torx bit set

*000589011000

7

Remove C-AAC multifunction sensor (B31) from the water collector (3)

 Bend bracket (5) back slightly.

8

Disconnect connector from multi-function sensor

convenience automatic air conditioning (B31)

9

Install in the reverse order