Remove/install refrigerant pressure and temperature sensor

AR83.30-S-5435P

Remove/install refrigerant pressure and temperature sensor

31.10.2018

Model

470 with engine 200, 699

Model

471 with engine 699

Shown on model 470.### 1# with engine 699 and code FY1 (Anti-Theft Protection Package)

1

Mounting clip

2

Cable duct

3

Cross member

4

Electrical connector

5

Refrigerant pressure and temperature sensor

 Warning

Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0006-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

 

Remove/install

1

Discharge air conditioning system.

AR83.30-S-1760P

2

Remove cover from radiator grille and from crossmember (3).

AR88.40-S-4001-02P

3

Remove retaining clip (1).

 Clip remover

*452589016300

4

Unclip cable duct (2) from crossmember (3).

Model 470.### 1# with engine 200.### 1#
with code FY1 (Anti-Theft Protection package)
Model 470.### 1# with engine 699.### 1#
with code FY1 (Anti-Theft Protection package)
Model 471.### 1# with engine 699.### 1#
with code FY1 (Anti-Theft Protection package)

5

Disconnect electrical connection (4).

6

Remove pressure and temperature sensor of refrigerant (5).

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW



Compressor oils (specification 362.1)

BB00.40-P-0362-01A

 Installation: Moisten sealing ring with compressor oil.

 Model 470 with engine 200.7
Model 470, 471 with engine 699Refrigerant pressure and temperature sensor to capacitor

*BA83.30-N-1001-01P

 Box wrench bit

*000589720300

7

Seal connection at condenser with clean stop plug.

If refrigerant pressure and temperature sensor (5) is not installed immediately.

 Record plug

*129589009100

8

Install in the reverse order

 Air conditioning

Number

Designation

Model 470 with engine 200.7

Model 470, 471 with engine 699

BA83.30-N-1001-01P

Refrigerant pressure and temperature sensor to capacitor

Nm

11

11