P83.30-4144-04
Shown on model 164.1
1 Electrical connector
B10/6 Evaporator temperature sensor
| Remove/install | ||
1 | Switch off ignition and remove the transmitter key from the EIS [EZS] control unit | On vehicles with Keyless Go, code 889: Press Keyless Go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m). | |
2 | Remove cover below left of instrument panel | ||
3 | Disconnect electrical connector (1) at evaporator temperature sensor (B10/6) | ||
4 | Pull evaporator temperature sensor (B10/6) out of A/C housing | ||
5 | Install in the reverse order |