ar8330p8085ak

Remove and install evaporator temperature sensor

Type ar · emne 83.30 · version 0102 · 2010-12-07

Gælder for: MODEL 169.0 /3, 245.2 (except 245.286) with CODE (580) Automatic air conditioning with CODE (581) Comfort automatic air conditioning

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.30 Klimaanlæg — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 207, 208, 231, 232, 233, 234)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.12 Sensor/kontakt/ledningssæt — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 207, 208, 231, 232, 233, 234)

AR83.30-P-8085AK

Remove and install evaporator temperature sensor

1.12.10

MODEL 169.0 /3, 245.2 (except 245.286)
with CODE (580) Automatic air conditioning
with CODE (581) Comfort automatic air conditioning

Remove and install evaporator temperature sensor

Illustrated on model 169

1 Left footwell floor covering

2 Electrical connector

3 AC housing

B10/6 Evaporator temperature sensor

P83.30-3988-03

Remove/install

1

Remove cover below dashboard on left

AR68.10-P-1500AK

2

Pull left footwell floor covering (1) forward on the side behind the dashboard and the center console and fold over to the side

Installation: Make sure that seating of the left footwell floor covering (1) on the side behind the dashboard and the center console is correct.

3

Disconnect electrical connector (2) at evaporator temperature sensor (B10/6)

4

Pull evaporator temperature sensor (B10/6) out of air conditioner housing (3)

Installation: Make sure that seating of the evaporator temperature sensor (B10/6) in the air conditioner housing (3) is correct.

5

Install in the reverse order

Henviste dokumenter