L83.25-0003-06
1 Water collector
2 Screws
3 Windshield washer nozzles
4 Feed hose
X88/11 Washer nozzle heater connector
| Removing, installing | ||
1 | Remove wiper arm | ||
2 | Disconnect washer nozzle heater connector (X88/11) | ||
3 | Unclip windshield washer nozzles (3) with feed hose (4) from water collector (1) | ||
4 | Pull feed hose (4) upward through hole in water collector (1) | ||
5 | Unscrew Phillips screws (2) and remove water collector (1) | Partially close engine hood Installation: Ensure that rubber seal is seated correctly on windshield. When replacing water collector | |
Transfer windshield washer nozzles. | |||
6 | Install in the reverse order |