ar8325d1155a

Remove and install pulsed valve

Type ar · emne 83.25 · version 0105 · 2003-09-15

Gælder for: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.25 Varmeautomatik — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

EinPAS 39 Varmesystem/ventilation/køling › 39.15 Klimatisering › 39.15.13 ledning/slange/ventil — Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

AR83.25-D-1155A

Remove and install pulsed valve

15.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install pulsed valve

D83.25-1105-06

1 Cycle valve

2 Hose clamp

3 Coolant hose

4 Rubber mounts

5 Bolt

6 Bracket

7 Rubber mounts

Remove/install

1

Position suitable receptacle for coolant below vehicle

2

Loosen hose clamps (2) and disconnect hoses (3)

3

Unscrew screws (5) and remove bracket (6) together with pulsed valve (1)

4

Turn bracket (6) slightly to the right and remove from the rubber mounts (4)

5

Pull rubber mounts (4, 7) out

Installation: install new rubber mount.

6

Install in the reverse order