ar8285p1000v

Remove and install COMAND operating, display and controller unit

Type ar · emne 82.85 · version 0101 · 2008-02-05

Gælder for: MODEL 171.4 with CODE (512) COMAND APS with DVD changer with CODE (527) COMAND APS (with navigation) with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (529) HIGH Class Japan with CODE (530) COMAND APS USA (with navigation system)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.85 Navigations- og kommunikationssystemer — Serie 171 (modeller 4**)

EinPAS 31 Kommunikation/information/underholdning › 31.10 head unit › 31.10.11 Styreenhed/relæ — Serie 171 (modeller 4**)

AR82.85-P-1000V

Remove and install COMAND operating, display and controller unit

23.1.08

MODEL 171.4
with CODE (512) COMAND APS with DVD changer
with CODE (527) COMAND APS (with navigation)
with CODE (527) COMAND APS with single DVD drive (with navigation)
with CODE (529) HIGH Class Japan
with CODE (530) COMAND APS USA (with navigation system)

Remove and install COMAND operating, display and controller unit

P82.85-9964-06

Shown on vehicle up to 2.3.08 without code (809) Model year 2009

1 Bolts

2 Center air outlet

3 Center console

4 Electrical connector

5 Electrical connector with fiber optic cable connector

A40/3 COMAND operating, display and controller unit

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove upper control panel control unit

AR54.21-P-1262V

2

Remove stowage compartment or beverage holder

AR68.10-P-1600V

3

Remove bolts (1)

4

Lift center air vent (2) until it is released from the fastenings (arrow) on the COMAND operating, display and controller unit (A40/3)

Installation: Ensure that center air nozzle (2) is correctly seated in the fastenings (arrow) at the COMAND operating, display and controller unit (A40/3).

5

Pull COMAND operating, display and controller unit (A40/3) out of center console (3) until electrical connector (4) and the electrical connector with fiber optic cable connector (5) are accessible

6

Disconnect electrical connector with fiber optic cable connector (5)

7

Cover electrical connector with fiber optic cable connector (5)

AR82.95-P-0005-01A

8

Disconnect electrical connector (4) and remove COMAND operating, display and controller unit (A40/3)

9

Install in the reverse order

10

Perform function check of the COMAND operating, display and controller unit (A40/3)

Henviste dokumenter