ar8285p1000ak

Remove and install COMAND operating, display and controller unit

Type ar · emne 82.85 · version 0201 · 2008-05-21

Gælder for: MODEL 169.0 /3, 245.2 with CODE (512) COMAND APS with DVD changer with CODE (526) COMAND with single DVD drive (without navigation) with CODE (527) COMAND APS (with navigation) with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (529) HIGH Class Japan

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.85 Navigations- og kommunikationssystemer — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

EinPAS 31 Kommunikation/information/underholdning › 31.10 head unit › 31.10.11 Styreenhed/relæ — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

AR82.85-P-1000AK

Remove and install COMAND operating, display and controller unit

29.4.08

MODEL 169.0 /3, 245.2
with CODE (512) COMAND APS with DVD changer
with CODE (526) COMAND with single DVD drive (without navigation)
with CODE (527) COMAND APS (with navigation)
with CODE (527) COMAND APS with single DVD drive (with navigation)
with CODE (529) HIGH Class Japan

Remove and install COMAND operating, display and controller unit

P82.85-9989-08

Shown on model 169.0 with code (527) COMAND APS USA (with navigation system)

1 Bolts

2 Instrument panel

A40/3 COMAND operating, display and controller unit

3 Electrical connectors

4 Fiber optic cable connector

Modification notes

5.7.06

"Disconnect/connect battery ground line" removed

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Save basic data from the COMAND operating, display and controller unit (A40/3) to STAR DIAGNOSIS temporarily

When replacing the COMAND operating, display and controller unit (A40/3).

Installation: Transfer temporarily stored basic data to COMAND operating, display and controller unit (A40/3).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04AK

2

Remove center air vent

AR83.10-P-4503AK

3

Remove control and operating unit cover

AR68.20-P-2314AK

4

Remove bolts (1)

5

Pull COMAND operating, display and controller unit (A40/3) out of the instrument panel (2) until the electrical connectors (3) and the fiber optic cable coupling (4) are accessible

6

Release, disconnect and cover fiber optic cable coupling (4)

Notes on avoiding damage to fiber optic cables during repair work

AH82.60-P-0001-05AK

7

Disconnect electrical connectors (3) and remove COMAND operating, display and controller unit (A40/3)

8

Install in the reverse order

Henviste dokumenter