S82.62-4593-08
Shown on model 470 with code JS1 (360° camera) |
1 | Bumper antenna | 3 | Screw | ||||
2 | Electrical connectors | 4 | Mounting clip |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Loosen left front fender liner in front area enough to access bumper antenna (1) | ||
3 | Remove tape on electrical connectors (2) | Anti-rattle tape | |
4 | Separate electrical connectors (2) | ||
5 | Remove screw (3) | ||
6 | Remove retaining clip (4) and take off bumper antenna (1) | Clip remover | |
7 | Install in the reverse order | ||
| Check | ||
8 | Switch on radio and perform function check of bumper antenna (1) |
452 589 01 63 00
Clip remover
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar8810s1301p