ar8262p8350gh

Replace fiber optical cable (D2B) between radio and sound amplifier (after testing)

Type ar · emne 82.62 · version 0101 · 2003-02-25

Gælder for: MODEL 163.113 /154 /174 #A as of 289565, 163.113 #X as of 754620, 163.128 /157 /175 with CODE (810) Sound system

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.62 Højttalere, forstærker, antenne — Serie 163 (modeller 113, 128, 154, 157, 174, 175)

EinPAS 31 Kommunikation/information/underholdning › 31.65 Radio › 31.65.12 Sensor/kontakt/ledningssæt — Serie 163 (modeller 113, 128, 154, 157, 174, 175)

EinPAS 31 Kommunikation/information/underholdning › 31.75 audio-afspilning/audiooutput › 31.75.12 Sensor/kontakt/ledningssæt — Serie 163 (modeller 113, 128, 154, 157, 174, 175)

AR82.62-P-8350GH

Replace fiber optical cable (D2B) between radio and sound amplifier (after testing)

8.10.02

MODEL 163.113 /154 /174 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175 with CODE (810) Sound system

Replace fiber optical cable (D2B) between radio and sound amplifier (after testing)

P82.62-2395-06

1 Exchange D2B wiring harness

A2 Radio

A2/13 Sound amplifier

A2/56 Radio and navigation unit

A40/3 COMAND operating, display and control module

Replace fiber optical cable (D2B) between radio and sound amplifier (after testing)

P82.62-2396-01

Shown on model 163 with automatic transmission

1 Exchange D2B wiring harness

2 Bracket

3 Clip

N15/3 ETC control module

Remove

Notes on fiber optic cable

Models 129, 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 463

AH82.70-P-0001-02A

Fiber optical cable, location

Model Series 163

GF82.00-P-4000-01GH

1

Remove radio (A2)

AR82.60-P-7502EA

2

Remove cover below instrument panel on driver's side

AR68.10-P-1500GH

3

Unscrew screw on Sound amplifier (A2/13) and disconnect D2B B-plug

Install

4

Pull the red insert of the D2B-wiring harness out of the D2B-plug on the sound amplifier (A2/13) and replace with the red insert of the exchange D2B wiring harness

Risk of breakage! Do not kink or stretch fiber optic cable

AR82.70-P-0004-01A

Pay attention to the correct installation position of the insert in the D2B B-plug. Cut off the fiber optical cable removed at the adhesive tape.

5

Route the exchange D2B wiring harness (1) behind the instrument panel along the existing wiring harness to the bracket (2) for the ETC [EGS] control module (N15/3) / plug of the interior wiring harness

6

Route the exchange D2B wiring harness (1) behind the bracket (2) for the ETC [EGS] control module (N15/3) to the clip (3) for the shift lock cable

7

Route exchange D2B-wiring harness (1) to the radio installation opening

8

Secure exchange D2B wiring harness (1) on existing wiring harness at the red adhesive tape markings provided for this

9

Pull the white insert of the D2B wiring harness out of the D2B plug on the radio and replace with the white insert of the exchange D2B wiring harness (1)

Risk of breakage! Do not kink or stretch fiber optic cable

AR82.70-P-0004-01A

Pay attention to the correct installation position of the insert in the D2B B-plug. Cut off the fiber optical cable removed at the adhesive tape.

10

Secure exchange D2B wiring harness (1) on existing rear wiring harness in the radio installation opening

11

Plug D2B plug into the sound amplifier (A2/13) and fasten the sound amplifier (A2/13) with a screw

12

Remove cover below instrument panel on driver's side

AR68.10-P-1500GH

13

Install radio (A2)

AR82.60-P-7502EA

Henviste dokumenter