S82.60-4634-08
1 | Bolts | N87/2 | Radio (Audio) | |
2 | Electrical connectors |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Temporarily store basic data of radio (Audio) (N87/2) in the vehicle diagnosis system. | Only when replacing the radio (audio) (N87/2). | |
| |||
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
3 | Remove center instrument panel cover. | ||
4 | Unscrew screw/bolts (1). | ||
5 | Pull radio (Audio) (N87/2) far enough out of device installation frame until the electrical connectors (2) are accessible. | ||
6 | Disconnect electrical connectors (2) and remove radio (Audio) (N87/2). | ||
| Install | ||
7 | Connect electrical connectors (2) and insert radio (Audio) (N87/2) into device installation frame. | ||
8 | Tighten screws (1). | ||
9 | Install center instrument panel cover. | ||
10 | Transfer temporarily stored basic data to the new radio (Audio) (N87/2) and perform commissioning of radio (Audio) (N87/2). | Only when replacing the radio (audio) (N87/2). | |
| |||
Model 447.6/7 | |||
| Check | ||
11 | Perform function test of radio (Audio) (N87/2) as well as all components actuated by the radio (Audio) (N87/2). |
Henviste dokumenter
- ad0000s200004e
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar6810s3430e