1 | Washer fluid reservoir |
2 | Filler neck |
3 | Connections |
4 | Nut |
5 | Electrical connector |
6 | Screw/nut |
7 | Washer fluid hoses |
M5/1 | Windshield washer system pump |
S42 | Windshield washer fluid level indicator switch |
P82.35-A029-05
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Danger | Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove the coolant expansion reservoir and place to one side with lines attached. | ||
| |||
2 | Remove filler neck (2). | ||
3 | Remove front right wheel and tire assembly. | ||
4 | Remove right front fender liner. | ||
5 | Release, disconnect and remove electrical connector (5) from holder. | ||
6 | Release and disconnect washer fluid hoses (7) at connections (3). | Collect escaping washer fluid in a suitable vessel. | |
7 | Remove nut (4). | ||
8.1 | Remove screw (6). | Model 118, 177 with engine 139 | |
8.2 | Remove nut (6). | Model 247.7 with engine 139 | |
9 | Remove washer fluid reservoir (1). | Installation: Check ball pin is correctly seated in guide. | |
10 | Remove windshield washer system pump (M5/1) with washer fluid hoses (7). | If the washer fluid reservoir (1) is replaced. | |
11 | Release and disconnect electrical connector from windshield washer system fluid level indicator switch (S42) and remove electrical wiring harness from washer fluid reservoir (1). | If the washer fluid reservoir (1) is replaced. | |
12 | Install in the reverse order. | ||
13 | Correct fluid level of windshield washer system. | ||
| Model 118, 177 with engine 139 | ||
| Model 247.7 with engine 139 | ||
| Check | ||
14 | Check windshield washer system for proper operation. | ||
| Model 118.6 with engine 139 | ||
| Model 118.3 with engine 139 | ||
| Model 177 with engine 139 | ||
| Model 247.7 with engine 139 |
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ap8235p8210d Vinduessprinkleranlæg - kontrol, korrigering af væskestand
- ap8235p8210f Vinduessprinkleranlæg - kontrol, korrigering af væskestand
- ap8235p8252e Kontrol af vinduesviskere, vinduessprinkleranlæg for funktion
- ap8235p8252g Kontrol af vinduesviskere, vinduessprinkleranlæg for funktion
- ap8235p8252h Kontrol af vinduesviskere, vinduessprinkleranlæg for funktion
- ap8235p8252hb Kontrol af vinduesviskere, vinduessprinkleranlæg for funktion
- ar2030p4949mfg
- ar4010p1102mfa
- ar8235p6002mfa
- ar8810p1301mfa
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.
- as8235z000101a Brandfare og fare for eksplosion pga. antændelse af sprinklervæske og frostbeskyttelsesmiddel og dampe fra disse. Fare for forgiftning pga. indtagelse af sprinklervæske og frostbeskyttelsesmiddel og indånding af dampe fra disse.