S82.30-4510-09
1 | Cap | 3 | Nut | 5 | Markings | ||
2 | Washer fluid hose | 4 | Wiper arm |
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Warning | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Move wiper motor into park position | ||
2 | Remove protective caps (1) | ||
3 | Disconnect washer fluid hoses (2) of windshield washer system | ||
4 | Unscrew nuts (3) | Nut, windshield wiper to wiper shaft | |
Torque wrench | |||
5 | Remove wiper arms (4) | Installation: Position wiper arms (4) on markings (5) of windshield. Wiper motor must be in park position. | |
Puller | |||
6 | Install in the reverse order | ||
| Check | ||
7 | Perform function test of the windshield washer system | ||
|
001 589 75 21 00
Torque wrench
001 589 38 33 00
Puller
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ap8230s8252a Funktionskontrol af vinduesviskere, vinduessprinkleranlæg og forlygtesprinkleranlæg
- ar8230s680001s
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- as8230z000101a Fare for personskade på grund af fastklemning eller knusning, i særlige tilfældefor afskæring af legemsdele ved arbejde på vinduesviskermekanikken.