Shown on model 447.8 with CODE JF1 (Rain sensor) |
1 | Wiper arm |
2 | Cap |
3 | Nut |
S82.30-4541-06
Danger ! | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
| Remove/install | ||
1 | Move wiper motor to parked position | ||
2 | Switch off ignition and remove transmitter key | ||
3 | Remove caps (2) | ||
4 | Unscrew nuts (3) | Nut, front wiper arm to wiper motor shaft | |
5 | Remove wiper arms (1) | Installation: Position wiper arms (1) on markings on windshield. Wiper motor must be in park position. | |
Puller | |||
6 | Install in the reverse order | ||
| Check | ||
7 | Perform function test of windshield wiper system | ||
|
001 589 38 33 00
Puller
Henviste dokumenter
- ap8230s8252e Funktionskontrol af vinduesviskere, vinduessprinkleranlæg og forlygtesprinkleranlæg
- ar8230s680001e
- as8230z000101a Fare for personskade på grund af fastklemning eller knusning, i særlige tilfældefor afskæring af legemsdele ved arbejde på vinduesviskermekanikken.