P82.30-2635-11
1 Puller
2 Cap
3 Wiper arm
4 Nut
5 Nut
| Remove/install | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Allow tailgate wiper motor to startup and switch off when in end position | ||
2 | Fold up cap (2) | ||
3 | Loosen nut (5) | ||
4 | Place suitable nut (4) onto wiper arm shaft and position puller (1) | The puller (1) must be supported by the nut (4) when the wiper arm (3) is removed, as otherwise the wiper arm shaft will be damaged. | |
| |||
5 | Detach wiper arm (3) using puller (1) | | |
6 | Remove puller (1) | | |
7 | Remove nut (4), unscrew nut (5), and take off wiper arm (3) | ||
8 | Install in the reverse order |
Puller
001 589 38 33 00
Henviste dokumenter
- as8230z000101a Fare for personskade på grund af fastklemning eller knusning, i særlige tilfældefor afskæring af legemsdele ved arbejde på vinduesviskermekanikken.