P82.30-2085-09
Illustrated on Model 203.0
1 Coupling at front SAM control unit with fuse and relay module
5 Bracket
N10/1 Front SAM control unit with fuse and relay module
2 Cable
3 Screw
4 Bolts
| Remove/install | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Remove water collector | Model 203 | |
Model 209 | |||
2 | Remove cover at front SAM control unit with fuse and relay module (N10/1) | ||
3 | Disconnect connector (1) | ||
4 | Expose lead (2) | ||
5 | Remove bolt (3) | Screw/bolt, wiper system to partition wall | |
6 | Remove bolts (4) | Screw, wiper system to body | |
7 | Remove wiper system | ||
8.1 | Remove bracket (5) | Model 203 | |
Installation: Ensure that bracket (5) is seated properly in order to prevent damage caused by the wiper linkage. | |||
9 | Install in the reverse order |
Windshield wiper
Henviste dokumenter
- ar8325p1402p
- ar8325p1402q
- as8230z000101a Fare for personskade på grund af fastklemning eller knusning, i særlige tilfældefor afskæring af legemsdele ved arbejde på vinduesviskermekanikken.