Wiper arm test and adjustment values
Number | Designation | Model | Model | ||
BE82.30-P-1002-01G | Wiper arm angle of incidence in center position | Left-hand drive vehicle | ° | +1.0 to -1.0 | +1.0 to -1.0 |
Right-hand drive vehicle | ° | -1.0 to +1.0 | -1.0 to +1.0 | ||
Wiper arm test and adjustment values
Number | Designation | Model | Model | ||
BE82.30-P-1002-01G | Wiper arm angle of incidence in center position | Left-hand drive vehicle | ° | +1.0 to -1.0 | +1.0 to -1.0 |
Right-hand drive vehicle | ° | -1.0 to +1.0 | -1.0 to +1.0 | ||
Adjustment tool set
211 589 02 21 00
P82.30-2306-04
The adjustment of the wiper arm angle of incidence is always done in the center position and only if the test value deviates from the tolerance range in the center position.
Use adjustment levers (Z4) from adjustment tool set.
P82.30-2442-11
Shown on model 210, wiper arm in center position
1 Put adjustment lever (Z4) as far apart as possible on wiper arm (1).
The wiper arm (1) is twisted with the aid of the adjustment lever (Z4), which was positioned close to the angle gauge (A). The second adjustment lever (Z4) is used as a counterholder.
2 Press adjustment levers (Z4) in the required direction until the correct adjustment value is shown on the scale of the angle gauge (A).
3 Remove adjustment lever (Z4) from wiper arm (1).
4 Read angle of incidence of wiper arm (1) again on dial of the angle gauge (A) and correct if necessary.
5 Detach angle gauge (A) with adapter from wiper arm (1) and lock wiper arm (1) in raised condition.