AR82.30-D-7800H | Remove/install rain/light sensor | 28.6.11 |
MODEL 900, 906 with CODE (JA5) Light/rain sensor
D82.30-0033-06
1 Cover
2 Retaining clamp
3 Electrical connector
B38/2 Rain/light sensor
Modification notes
7.2.11 | Repair method extended | Operation step 1 | |
7.2.11 | "Initialize rain sensor" removed, because it is described in the function check | Operation step 6 | |
7.2.11 | Repair method extended | Operation steps 1, 2 and 3 |
| Remove/install | ||
1 | Remove transmitter key from electronic ignition switch control unit | ||
2 | Remove cover (1) | ||
3 | Detach electrical connector (3) from rain/light sensor (B38/2) | ||
4 | Unhook retaining clamp (2) | The retaining clamp (2) is permanently installed with the rain/light sensor (B38/2). | |
5 | Remove the rain/light sensor (B38/2) with the retaining clamp (2) | Installation: If necessary, remove any silicone residue from the windshield. The rain/light sensor (B38/2) must always be replaced. If necessary, remove the protective foil on the rain/light sensor (B38/2) before installation. | |
Loctite 7200 | |||
6 | Install in the reverse order | ||
| Checking | ||
7 | Perform function check on rain/light sensor (B38/2) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1038-04A | Loctite 7200 | Henkel Loctite Deutschland GmbH |