S60.30-A029-09
1 | Hardtop dome lamp | 3 | Bolts | 5 | Headliner | ||
2 | Cover | 4 | Electrical connector | 6 | Electrical line |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Open rear pop-out window. | ||
2 | Disconnect electrical connection (4). | To do so, pull down roof lining (5) far enough until electrical connector (4) is accessible. | |
3 | Unclip covers (2). | Long wedge | |
4 | Remove screw/bolts (3). | ||
5 | Remove hardtop dome lamp (1). | To do so, guide hardtop dome lamp (1) with electric line (6) out of slot (arrow) in roof lining (5). | |
6 | Install in the reverse order. | ||
| Check | ||
7 | Perform function test on hardtop dome lamp (1). |
115 589 03 59 00
Long wedge
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.