ar8220p1000mfa

Remove/install overhead control panel control unit

Type ar · emne 82.20 · version 0103 · 2020-01-01

Gælder for: Model 118, 177, 247

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.20 Indvendig belysning — Serie 118 · Serie 177 · Serie 247

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.11 Styreenhed/modul/relæ — Serie 118 · Serie 177 · Serie 247

AR82.20-P-1000MFA

Remove/install overhead control panel control unit

18.12.2019

Model

118, 177, 247

Remove/install overhead control panel control unit

P82.20-A104-08

1

Bracket

N70

Overhead control panel control unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform commissioning of overhead control panel control unit (N70).

When replacing the overhead control panel control unit (N70).

AD00.00-P-2000-06MFA

2

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

3

Insert a plastic card or similar object (approx. 2 mm think) between the arrows and unclip the overhead control panel control unit (N70) from the bracket (1).

4

Fold down overhead control panel control unit (N70) in direction of arrow far enough to gain access to the electrical connectors.


Do not crush or kink or subject electric lines to tension.
This will result in damage to the electric lines and can impair their function.

5

Release and disconnect electrical connectors from overhead control panel control unit (N70).

The number of electrical connectors varies according to vehicle equipment.

6

Remove overhead control panel control unit (N70).

7

Install in the reverse order.

Henviste dokumenter