ar8220d1100a

Remove/install front overhead control panel

Type ar · emne 82.20 · version 0100 · 2015-10-16

Gælder for: Model 906

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.20 Indvendig belysning — Serie 906

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.18 kontakt/kontaktgruppe/betjeningsfelt — Serie 906

AR82.20-D-1100A

Remove/install front overhead control panel

1.10.15

Model

906

Remove/install front overhead control panel

1

Overhead control panel control unit

2

Long wedge

3

Retaining clamp

D82.20-0079-06

Remove/install front overhead control panel

4

Electrical connectors

D82.20-0080-05

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Unclip overhead control panel control unit (1) on right side and lower sideways

Removal: Insert long wedge (2) between overhead control panel control unit (1) and headliner and press back retaining clips (3) (arrows).

Long wedge

*115589035900

2

Disconnect electrical connections (4)

The number of electrical connectors (4) can vary depending on the equipment.

Installation: Ensure that wiring harnesses are routed properly.

3

Install in the reverse order

Remove/install front overhead control panel

115 589 03 59 00

Long wedge

Henviste dokumenter