ar8210w4633a

Remove/install xenon bulb ignition module

Type ar · emne 82.10 · version 0104 · 2019-12-13

Gælder for: Model 374.5 with body 374.860 with code LG1 (Xenon headlamps) Model 374.6 with body 374.870 with code LG1 (Xenon headlamps) Model 374.6 with body 944.890 with code LG1 (Xenon headlamps) Model 375.3 with body 375.820 with code LG1 (Xenon headlamps) Model 375.4 with body 375.860 with code LG1 (Xenon headlamps) Model 940, 942, 943, 944 with body 944.890 with code LG1 (Xenon headlamps) Model 950.5/6, 952.5/6, 953.6, 954.5 with body 940.890 with code LG1 (Xenon headlamps) Model 958.2 with body 958.870 with code LG1 (Xenon headlamps) Model 958.4 with body 958.880 with code LG1 (Xenon headlamps)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 374 (modeller 5**, 6**, 860, 870) · Serie 375 (modeller 3**, 4**, 820, 860) · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 2**, 4**, 870, 880)

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.11 Styreenhed/relæ — Serie 374 (modeller 5**, 6**, 860, 870) · Serie 375 (modeller 3**, 4**, 820, 860) · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 2**, 4**, 870, 880)

AR82.10-W-4633A

Remove/install xenon bulb ignition module

05.12.2019

Model

374.5 with body 374.860

with code LG1 (Xenon headlamps)

Model

374.6 with body 374.870

with code LG1 (Xenon headlamps)

Model

374.6 with body 944.890

with code LG1 (Xenon headlamps)

Model

375.3 with body 375.820

with code LG1 (Xenon headlamps)

Model

375.4 with body 375.860

with code LG1 (Xenon headlamps)

Model

940, 942, 943, 944 with body 944.890

with code LG1 (Xenon headlamps)

Model

950.5/6, 952.5/6, 953.6, 954.5 with body 940.890

with code LG1 (Xenon headlamps)

Model

958.2 with body 958.870

with code LG1 (Xenon headlamps)

Model

958.4 with body 958.880

with code LG1 (Xenon headlamps)

Remove/install xenon bulb ignition module

Illustrated on left lamp unit

1

Headlamp unit

2

Screw

3

Turn signal lamp

W82.10-1076-11

Remove/install xenon bulb ignition module

Illustrated on left lamp unit

4

Screw

5

Setting screws

W82.10-1077-11

Remove/install xenon bulb ignition module

Illustrated on left lamp unit

6

Rubber cap

7

Xenon ballast

W82.10-1078-11

Remove/install xenon bulb ignition module

Illustrated on left lamp unit

8

Xenon ignition module

W82.10-1080-11

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds.

Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area.

AS82.10-Z-0001-01A

Remove/install

1

Switch off ignition and exterior lights

2

Unscrew bolt (2) and remove cover above lamp unit (1)

3

Remove screw/bolts (4)

4

Remove turn signal lamp (3)


Model 374, 375, 940, 942, 943, 944, 950, 952, 953, 954

AR82.10-W-4725B

Model 958.2/4
Instructions have not yet been prepared for these variants.

5

Pivot out lamp unit (1)

6

Remove rubber cap (6)

7

Twist to unlock xenon ignition module (8) and remove


Carefully remove xenon ignition module (8).
If not handled carefully, the catch tabs can break off.

Note direction of rotation information on the rear of the xenon ignition module (8).
The electrical connector is automatically disconnected when removing the xenon ignition module (8).

8

Install in the reverse order

9

Perform function test

10

Check headlamp adjustment, adjust if necessary

Model 374, 375, 940, 942, 943, 944, 950, 952, 953, 954

AP82.10-W-8260A

Model 958.2/4
Instructions have not yet been prepared for these variants.

Henviste dokumenter