Shown on left side of vehicle of model 639 with code W50 (Rear-end door), two-wing, 180 degrees |
1 | Bolts |
3 | Connector |
E3 | Taillamp, left |
E4 | Taillamp, right |
S82.10-4515-02
S82.10-4516-02
Shown on left side of vehicle of model 639 with code W65 (Liftgate 9 and with code XZ1 (Model generation 1) |
1 | Bolts |
E3 | Taillamp, left |
E4 | Taillamp, right |
S82.10-4548-02
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Remove bolt (1) | ||
2 | Remove left taillamp (E3) or right taillamp (E4) in direction of arrow outwards | ||
3 | Disconnect plug (3) | ||
4 | Install in the reverse order | ||
| Check | ||
5 | Perform function test of left taillamp (E3) or right taillamp (E4) |
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)