P82.10-2540-06
Shown on model 203.0
1 Holes
E3 Left taillamp
E4 Right taillamp
Modification notes
| Removal/installation | ||
1 | Fold up side panel in area of left taillamp (E3), right taillamp (E4) | ||
2.1 | Loosen left sidewall paneling, right sidewall paneling on right in top section | With model 209.4 | |
3 | Disconnect electrical connector from left taillamp (E3), right taillamp (E4) | ||
4 | Unscrew nuts from left taillamp (E3), right taillamp (E4) | ||
5 | Remove left taillamp (E3), right taillamp (E4) | Installation: ensure that condition and seating of gasket are correct, replace if necessary. | |
6 | Install in the reverse order | ||
7 | Perform a function test |