ar8210p4735ff

Adjust headlamps

Type ar · emne 82.10 · version 0100 · 2006-07-26

Gælder for: MODEL 454.0 Adjust headlamp low beam for right-hand/left-hand traffic

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 454 (modeller 0**)

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.40 Frontlygte — Serie 454 (modeller 0**)

AR82.10-P-4735FF

Adjust headlamps

19.7.05

MODEL 454.0
Adjust headlamp low beam for right-hand/left-hand traffic

Adjust headlamps

P82.10-4329-06

1 Fender liner

2 Low beam service flap

3 Low beam cover cap

4 Adjustment lever

E1 Left front headlamp unit

E2 Right front headlamp unit

Remove

1

Turn steering wheel

If adjusting the left front lamp unit (E1), turn steering wheel to the left.
If adjusting the right front lamp unit (E2), turn steering wheel to the right.

2

Open low beam service flap (2) in fender liner (1)

3

Detach low beam cover cap (3) from left front lamp unit (E1) or right front lamp unit (E2)

Adjust

4

Align headlamp adjusting testing unit to vehicle

Observe operating instructions for headlamp adjuster tester.

Headlamp beam adjuster

*WE58.40-Z-1006-19A

5

Adjust left front lamp unit (E1) or right front lamp unit (E2) for right-hand/left-hand traffic at adjustment lever (4) (arrow)

Adjustment lever (4) must latch in the relevant end position.

Headlamp beam adjuster

*WE58.40-Z-1006-19A

Adjusting headlamps when driving abroad

AH82.10-P-0001-01FF

Install

6

Attach low beam cover cap (3) to left front lamp unit (E1) or right front lamp unit (E2)

7

Close low beam service flap (2) in fender liner (1)

8

Position steering wheel in straight-ahead position

Workshop equipment

WE58.40-Z-1006-19A

Headlamp adjustment testing unit

Henviste dokumenter