AR82.10-P-4730EC | Remove/install headlamp unit | 6.2.96 |
MODEL 170 up to 31.7.99 except CODE (612b) Xenon headlamp unit
P82.10-2566-06
Removal shown on left front lamp unit
2 Electrical connection (lamp unit)
3 Electrical connection (turn signal lamp)
4 Pneumatic line
5 Screw
7 Screw
E1 Left front headlamp unit
E6/1 Left turn signal lamp
| Remove/Install | ||
1 | Detach electrical connector (2) from left (E1) and right (E2) front lamp units | ||
2 | Disconnect pneumatic line (4) for headlamp range adjustment | ||
3 | Detach electrical connector (3) from left (E6/1) and right (E6/2) turn signal lamps | ||
4 | Remove left (E6/1) and right (E6/2) turn signal lamps | Release catch by inserting screwdriver into hole (magnifying glass) at end of fender support and push turn signal lamp out towards front. | |
5 | Unscrew bolts (5) and (7) | ||
6 | Carefully pull left (E1) and right (E2) front lamp unit out towards front | Installation: Align lamp unit such that a consistent distance is maintained between the fender and the closed engine hood. | |
7 | Install in the reverse order | Steps 6 to 1 | |
| Inspect | ||
8 | Check and correct headlamp adjustment | ||
| Model 170 except CODE (491) USA version. |
Henviste dokumenter
- ap8210p8260a Kontrol, korrektion af forlygteindstilling