ar8210p4660fr

Remove/install headlamp control unit

Type ar · emne 82.10 · version 0101 · 2018-07-20

Gælder for: Model 257, 290

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 257 · Serie 290

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.11 Styreenhed/relæ — Serie 257 · Serie 290

AR82.10-P-4660FR

Remove/install headlamp control unit

26.06.2018

Model

257, 290

Remove/install headlamp control unit

Shown on model 257 with code P35 (Light Package)

E1

Left front lamp unit

E1n9

Left headlamp control unit

E2

Right front lamp unit

E2n9

Right headlamp control unit

P82.10-8215-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Perform commissioning of headlamp control unit (E1n9, E2n9).

When replacing headlamp control unit (E1n9, E2n9).

AD00.00-P-2000-06FR

2

Remove front lamp unit (E1, E2).

AR82.10-P-4733FR

3

Remove screws of headlamp control unit (E1n9, E2n9).

4

Pull out headlamp control unit (E1n9, E2n9) until the electrical connector is accessible.

Installation: Ensure gasket is correctly installed.

5

Disconnect electrical connector and remove headlamp control unit (E1n9, E2n9).

6

Install in the reverse order.

Henviste dokumenter