ar8210p2025mfa

Remove/install front LED matrix lamp unit control unit

Type ar · emne 82.10 · version 0202 · 2020-01-13

Gælder for: Model 118, 177, 247 with code 640 (SAE dynamic LED headlamps, right-hand traffic) Model 118, 177, 247 with code 641 (Dynamic LED headlamps, left-hand traffic) Model 118, 177, 247 with code 642 (Dynamic LED headlamps, right-hand traffic)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 118 · Serie 177 · Serie 247

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.11 Styreenhed/relæ — Serie 118 · Serie 177 · Serie 247

AR82.10-P-2025MFA

Remove/install front LED matrix lamp unit control unit

08.01.2020

Model

118, 177, 247

with code 640 (SAE dynamic LED headlamps, right-hand traffic)

Model

118, 177, 247

with code 641 (Dynamic LED headlamps, left-hand traffic)

Model

118, 177, 247

with code 642 (Dynamic LED headlamps, right-hand traffic)

Modification notes

03.12.2019

Remove left front lamp unit (E1) and/or right front lamp unit (E2).

Operation step 1.

Remove/install front LED matrix lamp unit control unit

Shown on model 177.0 with code 642 (Dynamic right-hand traffic LED headlamp)

E1n11

Left front LED matrix lamp unit control unit

E2n11

Right front LED matrix lamp unit control unit

P82.10-8379-05

Remove/install front LED matrix lamp unit control unit

Shown on model 247.0 with code 642 (Dynamic right-hand traffic LED headlamp)

E1n11

Left front LED matrix lamp unit control unit

E2n11

Right front LED matrix lamp unit control unit

P82.10-A144-11

Remove/install front LED matrix lamp unit control unit

P82.10-8378-09

Shown on model 177.0 with code 642 (Dynamic right-hand traffic LED headlamp)

2

Windshield washer system washer fluid reservoir

E2n11

Right front LED matrix lamp unit control unit

E1n11

Left front LED matrix lamp unit control unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove left front lamp unit (E1) and/or right front lamp unit (E2).

Model 118, 247.0
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 118, 247.0
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 118, 247.0
with code 642 (Dynamic LED headlamps, right-hand traffic)

AR82.10-P-4733MFA

2.1

Remove left fender liner at front.

Model 177, 247.6/7
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 177, 247.6/7
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 177, 247.6/7
with code 642 (Dynamic LED headlamps, right-hand traffic)
When removing the left front LED matrix lamp unit control unit (E1n11).

AR88.10-P-1301MFA

2.2

Loosen right fender liner at front until the right front LED matrix lamp unit control unit (E2n11) is accessible.

Model 177, 247.6/7
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 177, 247.6/7
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 177, 247.6/7
with code 642 (Dynamic LED headlamps, right-hand traffic)
When removing the right front LED matrix lamp unit control unit (E2n11).

AR88.10-P-1301MFA

3

Remove windshield washer system washer fluid reservoir (2) until the left front LED matrix lamp unit control unit (E1n11) is accessible and secure windshield washer system washer fluid reservoir (2) against falling down.

Model 177, 247.6/7 with engine 260, 282, 608, 654
with code 640 (SAE dynamic LED headlamps, right-hand traffic)
Model 177, 247.6/7 with engine 260, 282, 608, 654
with code 641 (Dynamic LED headlamps, left-hand traffic)
Model 177, 247.6/7 with engine 260, 282, 608, 654
with code 642 (Dynamic LED headlamps, right-hand traffic)
When removing the left front LED matrix lamp unit control unit (E1n11).

AR82.35-P-6000MFA

Aid of helper required.

4

Remove screws from left front LED matrix lamp unit control unit (E1n11) or right front LED matrix lamp unit control unit (E2n11).

5

Remove left front LED matrix lamp unit control unit (E1n11) or right front LED matrix lamp unit control unit (E2n11) until the electrical connectors are accessible.

Installation: Ensure gasket is correctly installed.

6

Release and disconnect electrical connectors.

7

Install in the reverse order.

8

Commission front left LED matrix lamp unit control unit (E1n11) or front right LED matrix lamp unit control unit (E2n11).

When replacing left front LED matrix lamp unit control unit (E1n11) or right front LED matrix lamp unit control unit (E2n11).

AD00.00-P-2000-06MFA

2D Hand scanner

*000589086300

Remove/install front LED matrix lamp unit control unit

000 589 08 63 00

2D Hand scanner

Henviste dokumenter