ar8210p2025fr

Remove/install front LED matrix lamp unit control unit

Type ar · emne 82.10 · version 0101 · 2018-07-20

Gælder for: Model 257 with code P35 (Light Package) Model 290

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 257 · Serie 290

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.11 Styreenhed/relæ — Serie 257 · Serie 290

AR82.10-P-2025FR

Remove/install front LED matrix lamp unit control unit

26.06.2018

Model

257

with code P35 (Light Package)

Model

290

Remove/install front LED matrix lamp unit control unit

E1

Left front lamp unit

E1n11

Left front LED matrix lamp unit control unit

E2

Right front lamp unit

E2n11

Right front LED matrix lamp unit control unit

P82.10-8215-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Perform commissioning of front LED matrix lamp unit control unit (E1n11, E2n11).

When replacing front lamp unit LED matrix control unit (E1n11, E2n11).

AD00.00-P-2000-06FR

Installation: Observe matrix code on front lamp unit (E1, E2).

2

Remove front lamp unit (E1, E2).

AR82.10-P-4733FR

3

Remove screws of front LED matrix lamp unit control unit (E1n11, E2n11).

4

Pull out front LED matrix lamp unit control unit (E1n11, E2n11) until the electrical connector is accessible.

Installation: Ensure gasket is correctly installed.

5

Disconnect electrical connector and remove front LED matrix lamp unit control unit (E1n11, E2n11).

6

Install in the reverse order.

Henviste dokumenter