D80.57-1112-06
1 Instrument cluster paneling
2 Spacer
3 PU washer
4 Trim ring
N73 EIS [EZS] control unit
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Remove cover below steering wheel | ||
2 | Remove footweel ventilation air duct | ||
3 | Unscrew trim ring (4) from EIS [EZS] control unit (N73) and remove EIS [EZS] control unit (N73) downward | Installation: The guide of the shift-lock cable on the EIS [EZS] control unit (N73) (arrow) should point downward. | |
Claw wrench for trim ring on ignition/starter switch | |||
4 | Install in the reverse order | ||
5 | Connect Star Diagnosis and perform initial startup for EZS control unit (N73) | When replacing EZS control unit (N73) | |
6 | Carry out function test of shift-lock | Model 906 with code (G40) Automatic transmission | |
It must only be possible to shift the selector lever out of position "P" in key position "2" and when the brake pedal is depressed. It should only be possible to remove the vehicle key when the selector lever is in position "P". |
Claw-type wrench for rosette on ignition switch
210 589 00 07 00
Henviste dokumenter
- ad0000d200004sd
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar6810d1590a