ar8035d4515a

Remove/install transponder coil

Type ar · emne 80.35 · version 0104 · 2003-02-25

Gælder for: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (FZ7) Immobilizer MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL 903.462 /463 with CODE (FZ0) Central locking with master key with CODE (ZB2) Fedex supply MODEL 690.6

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.35 Radiofjernbetjening — Serie 690 (modeller 6**) · Serie 901 (modeller 0**, 3**, 4**, 6**) · Serie 902 (modeller 0**, 3**, 4**, 6**) · Serie 903 (modeller 0**, 3**, 4**, 462, 463, 6**) · Serie 904 (modeller 0**, 3**, 4**, 6**) · Serie 905 (modeller 6**)

EinPAS 29 kørselsgodkendelses-/sikringssystem › 29.16 Aflåsning/oplåsning › 29.16.14 Sender/modtager — Serie 690 (modeller 6**) · Serie 901 (modeller 0**, 3**, 4**, 6**) · Serie 902 (modeller 0**, 3**, 4**, 6**) · Serie 903 (modeller 0**, 3**, 4**, 462, 463, 6**) · Serie 904 (modeller 0**, 3**, 4**, 6**) · Serie 905 (modeller 6**)

EinPAS 29 kørselsgodkendelses-/sikringssystem › 29.25 Kørselsgodkendelse › 29.25.14 Sender/modtager — Serie 690 (modeller 6**) · Serie 901 (modeller 0**, 3**, 4**, 6**) · Serie 902 (modeller 0**, 3**, 4**, 6**) · Serie 903 (modeller 0**, 3**, 4**, 462, 463, 6**) · Serie 904 (modeller 0**, 3**, 4**, 6**) · Serie 905 (modeller 6**)

AR80.35-D-4515A

Remove/install transponder coil

28.9.98

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (FZ7) Immobilizer

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL 903.462 /463
with CODE (FZ0) Central locking with master key
with CODE (ZB2) Fedex supply

MODEL 690.6

Remove/install transponder coil

D80.35-0008-05

1 Transponder coil

2 Drive switch

3 Electrical center

4 Connector

Remove/Install

1

Unscrew central electrical system (3).

Leave electrical connectors and circuit 30 connected.

Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

AR54.25-D-1382B

Model 901.6, 902.6, 903.6, 904.6, 905.6, 690.6

AR54.25-D-1382A

2

Separate connector (4) of transponder coil (1)

3

Expose electric cable up to transponder coil (1)

Pay attention to routing of electric cable. Electric cable must be routed above the two top connectors of the electrical center (3).

4

Use a suitable plastic wedge to press transponder coil (1) off drive switch (2)

5

Install in the reverse order

Henviste dokumenter