ar8030p4500g

Removing, installing DAS control module

Type ar · emne 80.30 · version 0101 · 1997-04-25

Gælder for: MODEL 170 up to 31.5.97

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.30 Infrarød fjernbetjening — Serie 170

EinPAS 29 kørselsgodkendelses-/sikringssystem › 29.16 Aflåsning/oplåsning › 29.16.11 Styreenhed/relæ — Serie 170

EinPAS 29 kørselsgodkendelses-/sikringssystem › 29.25 Kørselsgodkendelse › 29.25.11 Styreenhed/relæ — Serie 170

AR80.30-P-4500G

Removing, installing DAS control module

14.2.96

MODEL 170 up to 31.5.97

Removing, installing DAS control module

P80.30-0354-04

1 Insulating mat
2 2-pin CAN connector
3 2-pin connector for transponder coil
4 18-pin connector

5 Base plate
N54/1 IR DAS control module

Removal, installation

1

Remove top section of instrument panel

AR68.10-P-1020G

2

Fold insulating mat (1) in area of instrument cluster back toward front

3

Disconnect 2-pin CAN connector (2)

4

Disconnect 2-pin connector for transponder coil (3)

5

Disconnect 18-pin connector (4)

Aid for connecting and disconnecting

6

Press retaining tabs (arrows) apart

7

Remove IR DAS control module (N54/1) from base plate (5)

When replacing control module or remote control key always indicate the lock number and chassis no., because the two parts are matched to one another

Installation: insert rear retaining lug on IR DAS control module (N54/1) into base plate (5)
After replacing IR DAS control module (N54/1) perform version coding according to Diagnosis Manual, Body

8

Reinstall in opposite order

Henviste dokumenter