Adjusting catch on C-pillar

AR77.50-P-3045G

Adjusting catch on C-pillar

16.8.96

Adjustment

1

Remove C-pillar paneling on vario-roof and close vario-roof

AR68.30-P-4500G

2

Push slide (1) up in direction of arrow and release

 Interval between pin (4) and oblong hole in slide (1) 2-3 mm

3

Loosen screw (3)

4

Adjust cam (2)

 Turn cam (2) to left or right to obtain interval of 2-3 mm after releasing slide (1)

5

Open and close vario-roof a number of times

 If the vario-roof is subjected to excessive pressure downward in the area of the separation joint between the front section and rear section of the roof when locking, 

 adjust stop buffer on vario-roof

AR77.50-P-3050G

6

Install C-pillar paneling on vario-roof

AR68.30-P-4500G