ar7721p080205mfb

Install rear fixed element of panoramic sliding sunroof

Type ar · emne 77.21 · version 0102 · 2019-10-07

Gælder for: Model 247 with code 413 (Panoramic sliding sunroof/glass roof)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 77 Soltag, kaleche, opsats › 77.21 panoramatag — Serie 247

EinPAS 38 Tagsystem › 38.15 Soltag/panoramatag › 38.15.33 pladebeklædning/soltagsdæksel — Serie 247

AR77.21-P-0802-05MFB

Install rear fixed element of panoramic sliding sunroof

Topical note

Notes on removal/installation of bonded elements of panoramic roof

AH77.21-P-0001-01A

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

Install rear fixed element of panoramic sliding sunroof

129 589 03 21 00

Feeler gauge

Install rear fixed element of panoramic sliding sunroof

1

Position rear fixed element (1), carefully place on adhesive bead and lightly press on.


Helper required.



2

Insert feeler gauges adjusted to the gap dimension (B) determined before removal between the rear fixed element (1) and the rear roof paneling (3) and align rear fixed element (1).



3

Center rear fixed element (1) between side roof paneling.



4

Position drip rails (2) and check lateral alignment of rear fixed element (1); correct if necessary.


Only remove drip rails (2) after the adhesive material has cured.



5

Place suitable weights on rear fixed element (1) during curing time of adhesive material.


Use flat weights, e. g. sandbags.
The rear fixed element (1) may otherwise be damaged.



6

Carefully remove cup suction tool.



7

Remove drip rails (2).


P77.21-A038-05

Henviste dokumenter