ar7721p080102mfa

Prepare panoramic sliding roof frame for installation

Type ar · emne 77.21 · version 0101 · 2019-02-19

Gælder for: Model 118, 177 with code 413 (Automatic panoramic sliding sunroof)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 77 Soltag, kaleche, opsats › 77.21 panoramatag — Serie 118 · Serie 177

EinPAS 38 Tagsystem › 38.15 Soltag/panoramatag › 38.15.31 Ramme — Serie 118 · Serie 177

AR77.21-P-0801-02MFA

Prepare panoramic sliding roof frame for installation

Topical note

Notes on removal/installation of bonded elements of panoramic roof

AH77.21-P-0001-01A

Model

118, 177

with code 413 (Automatic panoramic sliding sunroof)

Test and adjustment values for windshield

Number

Designation

Model 118

Model 177

BE67.10-P-1001-02C

Distance between top edge of window and front edge of roof/sliding roof aperture panel

Dimension "A"

mm

2,5 (1)

2,5 (1)

Prepare panoramic sliding roof frame for installation

129 589 03 21 00

Feeler gauge

Repair materials

Number

Designation

Order number

BR00.45-Z-1062-02A

Adhesive fabric tape

A 007 989 28 85

Prepare panoramic sliding roof frame for installation

P77.21-2601-09

1

Place panoramic sliding sunroof frame (1) onto suitable base with inside pointing upward.

2

Cut down residual adhesive beads (2) on panoramic sliding sunroof frame (1) to a remaining height of approx. 1 to 2 mm using a scraper.

If the panoramic sliding sunroof frame (1) is to be reused.

3

Remove residues of spacers (3) completely.

If the panoramic sliding sunroof frame (1) is to be reused.

4

Clean panoramic sliding sunroof frame (1).

If the panoramic sliding sunroof frame (1) is to be reused.

Commercially available devices/tools
Wet and dry vacuum cleaner

5

Clean bonding surfaces on panoramic sliding roof frame (1).

The cleaner is included in the repair kit.

Apply cleaner only to bonding surfaces and allow to dry completely.

It is not necessary to prime the bonding surfaces.

6

Install new spacers (3) as shown.

7

Place panoramic sliding sunroof frame (1) onto body and use the feeler gauge to align the distance between the top edge of the window and the roof front edge/sliding roof frame .

Two helpers required.

Center panoramic sliding sunroof frame (1) between side roof panelings and windshield.

8

Affix the strips of adhesive tape and cut through at the outer edges of the panoramic sliding sunroof frame (1).

9

Place panoramic sliding sunroof frame (1) onto suitable base with inside pointing upward.

10

Apply activator to bonding surfaces on panoramic sliding roof frame (1).

The activator is included in the repair kit.

Henviste dokumenter