ar7721p0490mfb

Remove/install motor for roller sun blind on panoramic sliding roof

Type ar · emne 77.21 · version 0102 · 2019-10-07

Gælder for: Model 247 with code 413 (Panoramic sliding sunroof/glass roof)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 77 Soltag, kaleche, opsats › 77.21 panoramatag — Serie 247

EinPAS 38 Tagsystem › 38.15 Soltag/panoramatag › 38.15.30 Drivenhed — Serie 247

AR77.21-P-0490MFB

Remove/install motor for roller sun blind on panoramic sliding roof

04.10.2019

Model

247

with code 413 (Panoramic sliding sunroof/glass roof)

Remove/install motor for roller sun blind on panoramic sliding roof

1

Electrical connector

2

Bolts

M12/5

Panoramic sliding roof roller sun blind drive unit

P77.21-2514-04

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove headliner.

AR68.30-P-4300MFA

2

Release electrical connector(1) and disconnect.

3

Remove screws (2) and remove panoramic sliding sunroof roller sunblind drive unit (M12/5).

4

Install in the reverse order.

Normalizing

5

Normalize roller sunblind with vehicle diagnosis system and perform teach-in process for automatic reversing function.

AD00.00-P-2000-06MFA

Henviste dokumenter