Remove/install driver door power window switch

AR72.29-P-0101LW

Remove/install driver door power window switch

26.09.2019

Model

205

Model

238

Model

253

Modification notes

09.02.2017

Repair method has been revised

Model 205.3 with code 901 (Chrome package Interior) or code P29 (AMG Line Interior)

Shown on model 205.0

1

Driver's door

6

Electrical connector

2

Armrest

7

Locks

3

Adhesive foil

8

Cover

4

Front catch

S20

Driver-side power window and outside mirror adjustment switch group

5

Rear catch

Shown on model 205.3 with code P29 (AMG Line Interior)

4

Front catch

9

Screw

5

Rear catch

10

Door lining



Remove

1

Install adhesive foil (3) on armrest (2) of driver door (1)


Attach adhesive (3) on armrest (2) in contact area of tool flush to cover (8) of driver side outside mirror adjustment power window switch group (S20).
Otherwise the armrest (2) can be damaged when removing the driver side outside mirror adjustment power window switch group (S20).

2

Loosen door lining (10) on driver door (1) and carefully lay down

Model 205.3
with code 901 (Interior chrome package)
except code P29 (AMG Line interior)
Model 205.3
with code P29 (AMG Line interior)
except code 901 (Interior chrome package)

AR72.10-P-1000LW

 Do not remove door lining (10) completely.

3

Unscrew bolt (9) on side of door lining (10)

Model 205.3
with code 901 (Interior chrome package)
except code P29 (AMG Line interior)
Model 205.3
with code P29 (AMG Line interior)
except code 901 (Interior chrome package)

4

Install clip remover in area of front catch (4) at an angle of 90° to driver side outside mirror adjustment power window switch group (S20) and position

 The  unclipping tool must be held at an angle of approx. 45° to the surface of the armrest (2).

 Clip remover

*452589016300

5

Unclip front catch (4) from armrest (2)

 Clip remover

*452589016300

6

Insert clip remover in area of rear catch (5) at an angle of 90° to driver side outside mirror adjustment and power window switch group (S20) and position

 The  unclipping tool must be held at an angle of approx. 45° to the surface of the armrest (2).

 Clip remover

*452589016300

7

Unclip rear catch (5) from armrest (2)

 Clip remover

*452589016300

8

Remove driver side outside mirror adjustment power window switch group (S20) from armrest (2) together with cover (8)

9

Disconnect electrical connector (6)

10

Unlock catches (7) and remove driver side outside mirror adjustment power window switch group (S20) from cover (8)

Only when replacing driver side outside mirror adjustment power window switch group (S20).



Install

11

Insert driver side outside mirror adjustment power window switch group (S20) into cover (8) and lock

When the driver side outside mirror adjustment power window switch group (S20) has been replaced.

12

Connect electrical connection(6)

13

Install driver side outside mirror adjustment and power window switch group (S20) in rear area of armrest (2) together with cover (8)

14

Tighten bolt (9) on inside of door lining (10)

Model 205.3
with code 901 (Interior chrome package)
except code P29 (AMG Line interior)
Model 205.3
with code P29 (AMG Line interior)
except code 901 (Interior chrome package)

15

Install door lining (10) on driver door (1)

Model 205.3
with code 901 (Interior chrome package)
except code P29 (AMG Line interior)
Model 205.3
with code P29 (AMG Line interior)
except code 901 (Interior chrome package)

AR72.10-P-1000LW

16

Install adhesive foil (3) on armrest (2) of driver door (1)



Clean

17

Remove adhesive foil residues in repair area



Check

18

Check electric window lifting mechanism switch group and driver side outside mirror adjustment (S20) for proper function