ar7220s2832s

Remove/install gas-operated strut from tailgate

Type ar · emne 72.20 · version 0104 · 2019-12-23

Gælder for: Model 636, 639.601/603/605/701/703/705/711/713/811/813/815 with code W65 (Tailgate)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 72 Døre › 72.20 Bagdør, bagklap — Serie 636 · Serie 639 (modeller 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.33 Bagagerumsklap/bagklap — Serie 636 · Serie 639 (modeller 601, 603, 605, 701, 703, 705, 711, 713, 811, 813, 815)

AR72.20-S-2832S

Remove/install gas-operated strut from tailgate

06.12.2019

Model

636, 639.601/603/605/701/703/705/711/713/811/813/815

with code W65 (Tailgate)

Remove/install gas-operated strut from tailgate

S72.20-4521-08

Shown on model 639.7

1

Retainer for gas-filled strut on tailgate

2

Retainer for gas-filled strut on body

3

Gas-filled strut

Remove/install

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Warning

Risk of injury from fingers being pinched or jammed when working on gas struts under pressure

Only remove and install pneumatic springs when they are not under tension and when the components are properly secured.

AS00.00-Z-0012-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

1

Unclip retainer for gas-filled strut on tailgate (1)

Use suitable tool, secure tailgate against falling down.

2

Unclip retainer for gas-filled strut on body (2)

Use a suitable tool.

3

Remove gas-filled strut (3)

4

Install in the reverse order

5

Carry out a function check of the gas-filled strut (3)

Henviste dokumenter