P72.20-2742-09
Shown with code (890) EASY-PACK liftgate
1 Cover
2 Bolts
3 Lower trim panel
4 Center trim
7 Clips
26 Lugs
28 Assembly wedge
29 Rag
8 Electrical connector
9 Electrical connector (with code (898) Keyless Go or code (890) EASY-PACK liftgate)
P72.20-2735-09
4 Center trim
10 Clip
11 Clips
15 Clip
16 Lugs
17 Liftgate
12 Clip
13 Clip
14 Clamp
P72.20-2736-09
5 Right upper paneling
6 Left upper paneling
18 Clamp
19 Clamp
24 Clamp
25 Clamp
27 Catch hook
20 Clamp
21 Clamp
22 Clamp
23 Clamp
| Remove/install | ||
1 | Unclip covers (1) at front from bottom paneling (3) using sharp assembly wedge (28). | Tap against assembly wedge (28) to loosen covers (1); do not unclip covers (1) by twisting assembly wedge (28). Place rag (29) over assembly wedge (28) to protect bottom paneling (3). Otherwise the covers (1) and the bottom paneling (3) can be damaged. | |
| |||
2 | Remove bolts (2) | Cordless drill/driver, cordless drill | |
3 | Unclip bottom paneling (3) from clamps (7) and remove until electrical connectors (8) are accessible | Installation: Ensure that all shackles (26) are located behind the center paneling (4). First arrest to two inner clamps (7). | |
4 | Disconnect electrical connectors (8) | Allow lower paneling (3) to hang down with electric lines connected only if the center paneling (4), left upper paneling (6) or right upper paneling (5) is to be removed. | |
5 | Disconnect electrical connector (9) | On vehicles with code (898) Keyless Go or code (890) EASY-PACK liftgate | |
Allow lower paneling (3) to hang down with electric lines connected only if the center paneling (4), left upper paneling (6) or right upper paneling (5) is to be removed. | |||
6 | Unclip clips (10) from center paneling (4) | | |
7 | Unclip clips (11) from center paneling (4) | | |
8 | Unclip clips (12) from center paneling (4) | | |
9 | Unclip clips (13) from center paneling (4) | | |
10 | Unclip center paneling (4) from clamps (14) | Installation: Clip center paneling (4) first into both inner clamps (14). Ensure that shackles (16) are seated in liftgate (17). | |
| |||
11 | Unclip clip (15) and remove center paneling (4) | | |
12 | Unclip clamp (18) from right upper paneling (5) | | |
13 | Unclip clamp (19) from right upper paneling (5) | | |
14 | Unclip clamp (20) from right upper paneling (5) | | |
15 | Unclip clamp (21) from right upper paneling (5) | | |
16 | Unclip upper right paneling (5) on catch hooks (27) from left upper paneling (6) and remove | | |
17 | Unclip clamp (22) from left upper paneling (6) | | |
18 | Unclip clamp (23) from left upper paneling (6) | | |
19 | Unclip clamp (24) from left upper paneling (6) | | |
20 | Unclip clamp (25) and remove upper left paneling (6) | | |
21 | Install in the reverse order | Installation: Always clip in or arrest paneling in sequence shown (3, 4, 5, 6). Otherwise the fasteners on the paneling (3, 4, 5, 6) can be damaged. |
Long wedge
110 589 03 59 00