AR72.20-D-4055B | Remove/install rear door lock | 12.3.01 |
MODEL WD1, WD2, WD3, WD6, WD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (W90) Delete item rear doors
MODEL 903.66 /67, 904.66
except CODE (W90) Delete item rear doors
with CODE (ZU7) National version for Canada
MODEL 903.66 /67, 904.66
except CODE (W90) Delete item rear doors
with CODE (ZU8) National version for USA
MODEL 903.66 /67, 904.66
except CODE (W90) Delete item rear doors
with CODE (ZU9) National version for Mexico
D72.20-1172-09
1 Inside door opener
2 Door paneling
3 Inner lock button
4 Grommet
9 Central locking motor
10 Connector
11 Connector
5 Bolt
6 Release cable
7 Locking rod
8 Door lock
| Remove/Install | ||
1 | Remove inside door opener (1) | ||
2 | Remove door paneling (2) from rear door | ||
3 | Disconnect connectors (10, 11) and expose cable. | On vehicles with central locking with radio remote control, code FY6 | |
Installation: Observe routing of electric leads. | |||
4 | Unscrew button (3) for inner lock on locking rod (7) | On vehicles with central locking with radio remote control, code FY6 | |
5 | Unscrew bolts (5) on door lock (8) | Installation: Replace self-locking bolts (5). | |
| |||
| |||
6 | Remove door lock (8) from rear door | ||
7 | Detach release cable (6) at door lock (8). | ||
8 | Install in the reverse order |
Rear door
Number | Designation | Model | |
BA72.20-N-1006-01A | Bolt for door lock on rear door | Nm | 10 |
Torx bit set
000 589 01 10 00