Remove/install rear-end door · ar7220d1901a · Mercedes-Benz WIS

AR72.20-D-1901A

Remove/install rear-end door

25.11.10

MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 except CODE (W90) No rear-end doors

MODEL 690.63/ 64

D72.20-0002-09

Illustration: Flat roof version

5 Right strap

6 Left strap

7 Paint protective sheet

8 Door stop

1 Left rear-end door

2 Rear-end door, right door wing

3 Cylindrical torx screw

4 Torx screw

Modification notes

1.2.05

Installation note (priming hinge contact surfaces) added

Step 5

 	Remove/install
1	Check door check (8) on both door hinges.	and replace if necessary
2	Release strap (5)
3	Inspect paint protective sheets (7) for damage	and replace if necessary
4	Remove screws (3, 4) attaching door hinges		*BA72.20-N-1001-01A
5	Lift out rear door	 The left rear-end door is removed in the same way.
		 If the door is replaced, the seams must be sealed all around before painting
		 Installation: Clean door hinge contact surfaces before installing rear-end door and apply primer.
6	Install in the reverse order
7	Inspect alignment of rear door	Adjust if necessary	AR72.20-D-1032B

 Rear-end door

Number	Designation		Model 690.6, 901, 902, 903, 904


BA72.20-N-1001-01A	Bolt/nut door hinge to body	Nm	25

Henviste dokumenter

ar7220d1032b