Remove/install door panel of sliding door

AR72.16-D-6610G

Remove/install door panel of sliding door

17.12.2014

MODEL

900.6

with CODE T16 (Sliding door right)

MODEL

906.6

without CODE ZO1 (Camper James Cook Compact)

without CODE ZO2 (Camper James Cook Classic)

MODEL

906.7

Shown with CODE D03 (Roof ad rear-end doors, high version)

1

Upper door paneling (with CODE D03 (Roof and rear-wend doors, high version))

2

Lower door trim

3

Retaining clips

4

Cap (with CODE PE4 (Mastercode Bus DCAA, Argen company) or with CODE PE5 (Mastercode Bus platform seating, Argen company))



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Enter and close siding door

2

Unclip caps (4) and unscrew bolts below

MODEL 906.657 with CODE PE4 (Master code bus DCAA Argen company) or with CODE PE5 (Master code BUS platform seating, Argen company)

 Clip remover

*452589016300

3

Unclip upper door paneling (1) and remove

MODEL 900.6 with CODE D03 (Roof and rear-end doors, high version), MODEL 906.7 with CODE D03 (Roof and rear-end doors, high version), MODEL 906.6 with CODE D03 (Roof and rear-end doors, high version) except CODE PE4 (Mastercode Bus DCAA Argen company) and except CODE PE5 (Mastercode Bus platform seating, Argen company)

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

If retaining clips are damaged:



Replace retaining clip.

4

Unclip lower door trim (2) and remove

 Installation: Check retaining clips (3) for damage.

 Long wedge

*115589035900

if retaining clips (3) are damaged:



Replace the retaining clips (3).

5

Remove inner paneling from window frame on sliding door

MODEL 906.657 with CODE PE4 (Master code bus DCAA Argen company) or with CODE PE5 (Master code BUS platform seating, Argen company)

AR72.16-D-6613A

6

Install in the reverse order