Disassemble/assemble crank mechanism for hinged door

Type ar · emne 72.15 · version 0107 · 2003-09-15

Gælder for: MODEL 901, 902, 903, 904, 905 MODEL 690.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Ikke tilgængelig på “da”; vises på Engelsk.

AR72.15-D-5615A

2.3.96

MODEL 901, 902, 903, 904, 905

MODEL 690.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Disassemble/assemble crank mechanism for hinged door

D72.15-0006-01

 	Disassemble/assemble
1	Remove crank mechanism		AR72.15-D-5605A
2	Drill out pop rivet heads on crank mechanism carrier plate	 Drill bit diameter 4.8 mm.
		 Installation: Replace blind rivet.
3	Remove crank mechanism from carrier plate
4	Assemble in reverse order

Henviste dokumenter

ar7215d5605a