Adjust 2nd door on right

AR72.15-D-1022A

25.11.09

MODEL 901.32 /42 /62, 902.32 /42 /62, 903.02 /32 /42 /62, 904.32 /42 /62, 905.62

MODEL XD2, XD3, XD4, XD5, XD6, XD7

MODEL 903.62, 904.62 with CODE (ZU9) national version for Mexico

D72.15-0009-06

A Ridge pattern

B Door gap

	Adjust
1	Check gaps and ridge pattern on door all the way around	 Ridge transitions flush without offset.	*BE72.15-N-1006-01A
2	Adjust door gap and ridge pattern	 Door gap B and ridge pattern A.	AR72.15-D-1022-01A
		Text value for door gap	*BE72.15-N-1006-01A
			*BA72.15-N-1007-01A
3	Adjust installation depth at front and rear	 Adjust front door contour transitions so that they are flush up to max. 1 mm recessed, rear up to 1 mm extension (wind noises). Rotary tumbler should engage in the center of the striker eye.	AR72.15-D-1022-02A
			*BA72.15-N-1004-01A
			*BA72.15-N-1014-01A

Hinged doors check values

Number	Designation		Model 690.6, 901, 902, 903, 904, 905	Model WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7


BE72.15-N-1006-01A	Door gap on 2nd door, right, all-round	mm	7 (0.5	7 (0.5

 Hinged doors

Number	Designation		Model 690.6, 901, 902, 903, 904, 905	Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7


BA72.15-N-1004-01A	Bolt, door hinge to B-pillar	Nm	25	25
BA72.15-N-1007-01A	Bolt, door hinge to hinged door	Nm	25	25
BA72.15-N-1014-01A	Bolt, for locking bolt to C-pillar	Nm	25	25