Remove/install rear door lining

AR72.12-P-1010LF

Remove/install rear door lining

06.04.2016

Model

222.0/1/9

Shown on model 222.0

1

Door lining

16.1

Screw

S21/6

Left rear door switch group

3

Trim piece

18

Switch trim

S21/7

Right rear door switch group

15

Catch hook

S21/3

Left rear door power window switch

16

Bolts

S21/4

Right rear door power window switch

Shown on model 222.0

1

Door lining

10

Mounting clip

H4/71

Right rear door tweeter

2

Rear door

12

Electrical connector

H4/80

Left rear door midrange speaker

3

Trim piece

13

Electrical connector

H4/81

Right rear door midrange speaker

5

Inside door opener cable

19

Mounting clip

N69/3

Left rear door control unit

6

Inner door handle

E17/5

Left rear door exit and warning lamp

N69/4

Right rear door control unit

7

Electrical connector

E17/6

Right rear door exit and warning lamp

8

Electrical connector

H4/70

Left rear door tweeter

Shown on model 222.9

1

Door lining

21

Catch hook

4

Door knob

22

Wire lock

20

Slide

Shown on model 222.9

7.1

Electrical connector

7.2

Electrical connector

7.3

Electrical connector

7.4

Electrical connector

N69/3

Left rear door control unit

N69/4

Right rear door control unit

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Lift catch hook on trim piece (3) through opening (arrow B) with suitable screwdriver, then slightly guide catch hook of trim piece (3) out of armrest and hold trim piece (3) so that the catch hook cannot stuck

2

Unclip with trim piece (3) from front toward rear from remaining mounting points and remove

 Installation: Ensure the trim piece (3) is seated correctly in armrest.

 Clip remover

*452589016300

3

Unlock catch hook (15) through opening (arrow C) in door lining (1) and remove switch pod (18) with left rear door power window switch (S21/3), right rear door power window switch (S21/4), left rear door switch group (S21/6) or right rear door switch group (S21/7) upward from door lining (1)

 Do not disconnect electrical connector.

4

Remove bolts (16)

5

Remove bolt (16.1)

Model 222.9

6

Unclip left rear door exit/warning lamp (E17/5) or right rear door exit/warning lamp (E17/6) from door lining (1)

 Do not disconnect electrical connector.

 Clip remover

*452589016300

7

Reach into opening (arrow A) and carefully unclip retaining clips (10) from door lining (1)


Unclip door lining (1) by hand.
The door lining (1) can be damaged when using the assembly wedge.

8

Unclip door lining (1) from retaining clip (19) in rear door (2)

Model 222.0/1
with code 297 (Roller sun blinds in rear doors)


Unclip door lining (1) by hand.
The door lining (1) can be damaged when using the assembly wedge.

9

Unhook inside door opener cable (5) on inside door handle (6)

10

Unlock electrical connectors (7, 8) on left rear door control unit (N69/3) or right rear door control unit (N69/4) and remove

11

Unlock electrical connectors (7.2, 7.3, 7.4) on left rear door control unit (N69/3) or right rear door control unit (N69/4) and remove

Model 222.9

12

Disconnect electrical connection (7.1)

Model 222.9

13

Unlock electrical connector (12) on left rear door midrange speaker (H4/80) or right rear door midrange speaker (H4/81) and remove

14

Unlock electrical connector (13) on left rear door tweeter (H4/70) or right rear door tweeter (H4/71) and remove

15

Unlock catch hook (21), push slide (20) downward and turn wire lock (22) in direction of arrow

Model 222.9

16

Pull door locking knob (4) with wire lock (22) out of door lining (1) and remove

Model 222.9

17

Remove door lining (1)

 Guide left ear door exit and warning lamp (E17/5) or right rear door exit and warning lamp (E17/6) through door lining (1) with electrical line connected and allow to hang down.

 Installation: The new door lining (1) is delivered together with the speaker grille. If it is different than the previously installed speaker grille, transfer or replace.

18

Install in the reverse order